You grind your tooth and take flight into a trend, because this annoying noise has cast a chill over you. This disgusting problem happens, but it is sometimes so complicated that it certainly makes you bite your nails then scratch your mind crazily when fixing it. But if you follow the below instructions, things would be clear. Some computer situations and audio credit cards have were made coarsely or imprecisely, or installed unsteadily, which may lead to poor connection between the golden finger and the growth slot. This is a common issue for independent audio card.
You can pull out and reinsert the sound credit card, or amend it with an instrument like pliers. Commonly audio card has two sound outputs, one is Line out, and the other is Speaker. Line out lovers active speakers like loudspeaker or amplifier, and Speaker lovers passive audio speakers or a horn.
Some audio cards depend on the jumper to choose the Line and the Speaker for it only has one fan-out. Manufacturers default such cards a Speaker output, thus you need to pull out the credit card to change its jumper. The sound card is liable to be interrupted by other development cards, specifically by display card. Sometimes a PCI display card with a Bus Master function might bring about loud noise in a PCI audio card, but if you disable its Bus Master, the performance of video adapter would be degraded greatly. To solve this noise problem you can place the PCI sound card and display card into the PCI slots at intervals, or change for an AGP graphics card simply.
- The legal bases of the processing
- Teleseminars and Interviews
- Jackbox Party Pack – The sassy quiz game you can play with your friends
- Clipmarks: Bite-size hiligh-lights on the web
- 11 years ago from Durham, UK
You can also use an aluminum shield to enclose your audio cards and keep it perfect globe for the purpose of avoiding negative effects on the sound card from the high-frequency radiation made by motherboard and graphics credit card. When you set up audio drivers, you should choose manufacturer drivers than Windows default drivers rather. If you use the Add New Programs in the Control Panel to install your audio driver, you should select to set it up from a CD-Rom or floppy disk, not to add it from Windows. If you have installed Windows driver already, well right-click My Computer then, select Properties then the Hardware tab and open Device Manager, double-click Sound, game, and video controllers to increase it.
Then right-click your audio devices, select Properties, click the Driver tab, choose Update Driver, and choose to install it from a set-up CD-Rom or floppy disk. After that put in the disk that was included with your sound card and install the manufacturer driver properly. If you don’t start using a shield line for connecting your microphone and sound adapter or the range is bad earth, the high-frequency jam signals may go through your file input circuit and cause noise outside. Remove your like the sound shall disappear soon. If a shield cable is in use, check if the cable’s outer shield is good grounding.
For some cheap and crappy ISA audio card, it would easily make noise even when your speaker is in a little volume. If the above-mentioned approaches still don’t work, possibly for the reason that the capacitance of your sound card has decreased and it is incapable of filtering out noise signals, thereby you’d better replace your sound card. Want to see what problems your sound credit card has? Click here for a FREE SCAN!